Iconic Systems · Engineered Construction Philippines
What is E-Con? Engineered Construction in the Philippines
E-Con is engineered components built from your design selection in the Instrument, pre-engineered for assembly, so your own installer can build with less guesswork and less specialist skill.
Unsigned design set; not approval to build. Manage your contractor from here.
The Problem
Why design, builders, and subdivision rules don't match
Across Philippine residential lots, three things routinely pull in different directions: architectural drawings, subdivision Deed of Restrictions and National Building Code setbacks, and how a local contractor estimates and builds on site.
When design sketches are separate from the part list, builders pad contingencies, improvise wall and MEP routing on the lot, or hit setback and height revisions mid-project. By contrast, E-Con is engineered components built from your design selection in the Instrument, pre-engineered for assembly, so your own installer can build with less guesswork and less specialist skill.
How E-Con Works
Four steps from design selection to site assembly
- Step 01
Pick design
Select and configure your house layout in the Instrument for your Philippine lot, aligning footprint, storeys, and subdivision rules in V1 Land (load-bearing wall system, live in beta).
- Step 02
Components engineered
Your design selection compiles into pre-engineered components across Categories A (Footings), B (Ground floor & MEP), C (Shell), and D (Architectural items), alongside an Unsigned design set; not approval to build.
- Step 03
Delivered
Pre-engineered components are manufactured in San Simon, Pampanga by MDCC TECH OPC and organized by stage and letter (A–D) under a written project quote.
- Step 04
Your installer assembles
Your own appointed installer assembles the pre-engineered components on your lot with less guesswork and less specialist skill. Manage your contractor from here.
Category Comparison
E-Con vs. traditional construction vs. box prefab
| Dimension | E-Con (Engineered Construction) | Traditional Site Build | Box Prefab |
|---|---|---|---|
| Core method | E-Con is engineered components built from your design selection in the Instrument, pre-engineered for assembly, so your own installer can build with less guesswork and less specialist skill. | Site-cut, site-batched concrete and masonry built from scratch on the lot. | Pre-built volumetric boxes or fixed cabin modules shipped from a catalog. |
| Design & lot fit | Configured in the Instrument around your lot geometry, setbacks, and village restrictions. | Custom drawings often disconnected from builder material takeoffs and site rules. | Fixed container or box footprints that struggle with irregular subdivision lots. |
| Structural system | V1 Land load-bearing wall system (live in beta); V2 Air and V3 Water coming soon. | Conventional reinforced concrete columns, beams, and hollow-block infill. | Light container frames or fixed panelized cabins. |
| Component structure | Four lettered component categories: A (Footings), B (Ground floor & MEP), C (Shell), D (Architectural items). | Thousands of loose hardware, aggregate, and lumber line items bought piecemeal. | Single bundled unit with limited category separation. |
| Builder & contractor role | Your own installer assembles pre-engineered parts on your land. Manage your contractor from here. | General contractor estimates, procures, fabricates, and coordinates every trade on site. | Vendor crew required for proprietary craning and module joining. |
| Design set status | Unsigned design set; not approval to build. Licensed sign-and-seal and local permits remain required. | Separate architect/engineer drafting cycle before any bill of quantities exists. | Vendor shop drawings only; local site foundation and permit work excluded. |
Iconic Systems Editions
V1 Land live in beta · V2 Air and V3 Water coming soon
V1 Land (load-bearing wall system) is live in beta inside the Instrument, compiling Categories A (Footings), B (Ground floor & MEP), C (Shell), and D (Architectural items) for Philippine lots. V2 Air and V3 Water are coming soon with no published specifications. Unsigned design set; not approval to build.
Frequently Asked Questions
E-Con questions and answers
- What is E-Con construction?
- E-Con is engineered components built from your design selection in the Instrument, pre-engineered for assembly, so your own installer can build with less guesswork and less specialist skill. V1 Land, a load-bearing wall system, is live in beta; V2 Air and V3 Water are coming soon. Manage your contractor from here.
- Is E-Con the same as prefab?
- No. Traditional box prefab ships fixed container modules that limit lot layout. E-Con is engineered components built from your design selection in the Instrument, pre-engineered for assembly, so your own installer can build with less guesswork and less specialist skill across Categories A, B, C, and D. Manage your contractor from here.
- Who builds an E-Con house?
- Your own installer builds the house on your land. MDCC TECH OPC manufactures the pre-engineered A–D components in San Simon, Pampanga from your design selection in the Instrument by Homeqube Pte Ltd. You appoint your own builder directly and coordinate each assembly phase by letter. Manage your contractor from here.
- Can I manage my own contractor with E-Con?
- Yes. Because E-Con is engineered components built from your design selection in the Instrument, pre-engineered for assembly, so your own installer can build with less guesswork and less specialist skill, you split Categories A–D into work packages, share checklists with your subcontractor, and track milestones. Manage your contractor from here.
- How does E-Con work in the Philippines?
- E-Con works in four steps: first, pick and shape your house design in the Instrument for your Philippine lot; second, your selection compiles into pre-engineered A–D components; third, components are prepared for staged site delivery under a written quote; fourth, your own installer assembles them. Manage your contractor from here.
- What is included in the V1 Land system?
- V1 Land is the Iconic Systems load-bearing wall system, currently live in beta. It organizes your house into four pre-engineered component categories: A for Footings, B for Ground floor & MEP, C for Shell walls and roof slabs, and D for Architectural items and openings. Manage your contractor from here.
- Are E-Con design sets approved building permits?
- No. Instrument outputs are an Unsigned design set; not approval to build. Before site work begins, your appointed licensed architect or engineer must prepare, sign, and seal permit drawings, and you must secure your local building permit, geodetic survey, and soil report for your lot. Manage your contractor from here.
- What are V2 Air and V3 Water?
- Within Iconic Systems, V1 Land is the load-bearing wall system live in beta today. V2 Air and V3 Water are upcoming system editions that are coming soon with no published specifications, pricing, or ordering schedules yet. Only V1 Land is available for design exploration today. Manage your contractor from here.
- What is the relationship between Engineered Components and the Kit of Parts?
- Engineered Components are the physical pre-engineered Category A–D building systems configured in the Calma Blocks Kit-of-Parts Instrument, and the Kit of Parts (Kit A, Kit B, Kit C, and Kit D) is the concrete set of numbered kits you quote, lock, and buy per stage from MDCC TECH OPC.